SANITOP
- pump only
The
smallest and quietest macerator on the market !
The Sanitop is
a system that is used to install a complete bathroom up to 12 feet below
the sewer line,
or even up to 120 feet away from a soil stack. It
can handle the effluent from a toilet and sink.
A normal operating
cycle for Sanitop takes about 10 - 15 seconds depending upon the discharge
pipe run
configuration; power consumption is therefore
minimal.
A non-return valve,
which comes already assembled on the discharge elbow, prevents back flow
into the unit.
The design of
this model consists of vibration absorbers which enable the reduction of
operating sound by reducing the transmitted sounds
from
any location where
such resonance transmission could occur. This new design reduces the
operating sound of this pump by 10dB.
The Sanitop is
simplicity itself to install; there are just four connections.
- The macerator/pump
is connected to the spigot of a horizontal rear discharge toilet.
- The
toilet tank is connected to the water supply.
- The macerator/pump
is connected to the small diameter discharge pipe work.
- The macerator/pump
is connected to the electrical supply.
The Sanitop unit
must be connected to our rear discharge toilet. This system uses much less
water than a regular toilet as it only
uses 1.6
USG (6 liters)
of water per flush. Note: This toilet only works in combination
with the
Sanitop.
